Central Machinery 63256 User Manual (English)

Questions and Answers:

K
Kevin MullinsAug 7, 2025
Why won't my Central Machinery 63256 start?
- W
  Wendy ParkAug 7, 2025
  Your Central Machinery Ultrasonic Jewelry Cleaner might not start due to a few reasons: there may be no power at the outlet, the cord might not be properly connected, or the automatic overheating safety shut-off feature may have tripped. Check the power at the outlet and ensure the cord is plugged in securely. If the unit overheated, allow a fifteen-minute cool-down period before trying to use it again.
J
Jennifer WilsonAug 17, 2025
What to do if my Central Machinery 63256 Ultrasonic Jewelry Cleaner will not start?
- J
  Jennifer BrownAug 17, 2025
  If your Central Machinery Ultrasonic Jewelry Cleaner isn't starting, first, check that the power outlet is working. Next, make sure the cord is properly plugged into the outlet and the cleaner. Finally, the unit may have automatically shut off due to overheating. If this is the case, allow it to cool down for fifteen minutes before attempting to use it again.
W
William FrankAug 27, 2025
How to fix a Central Machinery 63256 Ultrasonic Jewelry Cleaner that won't turn on?
- A
  Ashley LeeAug 27, 2025
  If your Central Machinery Ultrasonic Jewelry Cleaner is not turning on, there are a few things to check. First, verify that the outlet has power. Second, ensure that the power cord is securely plugged into both the cleaner and the outlet. Lastly, the cleaner might have shut off due to overheating. Let it cool down for fifteen minutes before trying to use it again.

Central Machinery 63256 Specifications

General

Model	63256
Category	Ultrasonic Jewelry Cleaner
Brand	Central Machinery
Ultrasonic Frequency	42 kHz
Power Consumption	35W
Tank Material	Stainless Steel
Timer Range	90, 180, 280, 380 & 480 seconds
Power Supply	AC 120V, 60Hz