INSTRUCTIONS AND PRECAUTIONS
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
SAVE THESE INSTRUCTIONS. READ ALL
PRECAUTIONS AND INSTRUCTIONS.
Copyright
©
2008 by Harbor Freight Tools
®
. All rights reserved. No portion of this document or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product
may differ slightly from the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
SPECIFICATIONS
NOTE: This item is designed specically to be used
with SKU # 66211 Metal Shrinker/Stretcher.
Do not use for any other purpose.
Stand Height 36-1/2”
Included Tool 8mm Hex Key
Safety Pin 3” L x 5/8” Diameter
UNPACKING
When unpacking, check to make sure that
the item is intact and undamaged. If any parts are
missing or broken, please call Harbor Freight Tools
at the number shown on the cover of this document
as soon as possible.
STAND FOR SKU
66211
METAL SHRINKER/
STRETCHER
66235
To Next Page
Need help?
General
