Central Machinery 95964 User Manual

5.5 HP CHIPPER/SHREDDER
Model 95964
OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improve-
ments, actual product may differ slightly from the product described herein. Tools required for assembly
and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 10d

Central Machinery 95964 Specifications

General

Engine Type	4-Stroke OHV
Chipper Capacity	3 inches
Horsepower	6.5 HP
Shredder Capacity	1/2 inch
Fuel Tank Capacity	0.95 gallon
Weight	121 lbs.
Wheel Size	10 in.

Summary

OPERATING INSTRUCTIONS

GENERAL SAFETY WARNINGS

SAVE THESE INSTRUCTIONS

Important instruction to keep the safety manual for future reference.

SPECIFIC SAFETY RULES AND PRECAUTIONS

FIRE AND EXPLOSION PRECAUTIONS

MECHANICAL PRECAUTIONS

CHEMICAL PRECAUTIONS

ENGINE INSTRUCTIONS

Before starting the Engine

Steps and cautions before starting the engine for the first time.

Oil Instructions

Filling Engine Oil

Instructions for checking and filling the engine oil level.

To Change Oil

Procedure for draining and refilling engine oil.

Fuel Handling and Air Filter

Filling the Fuel

Steps for filling the fuel tank prior to initial use.

Draining The Fuel Tank and Carburetor

Procedure for draining fuel from the tank and carburetor.

Air Filter Maintenance

Instructions for inspecting and cleaning the air filter.

CHIPPER/SHREDDER OPERATION

Spark Plug Check

Information on checking and replacing the spark plug.

Before Starting Operation

Pre-operation checks and safety equipment requirements.

Starting Engine

Step-by-step guide to starting the engine.

Shredding and Chipping

INSPECTION, MAINTENANCE, AND CLEANING

MAINTENANCE SCHEDULE

TROUBLESHOOTING

SCHEMATIC ASSEMBLY DIAGRAM

CHIPPER/SHREDDER PARTS LIST

CHIPPER/SHREDDER ASSEMBLY DIAGRAM

ENGINE PARTS LIST

ENGINE ASSEMBLY DIAGRAM

Emission Control System Warranty

Emission Control Defects Warranty Statement

Warranty statement for emission control systems in California and USA.

Manufacturer's Warranty Coverage

Details the warranty coverage for engines.

Harbor Freight Tools Emission Control Coverage

Specific warranty coverage for emission control defects by HFT.

Owner's Warranty Responsibilities

Outlines the responsibilities of the engine owner regarding maintenance.

Warranty Provisions

Lists the specific provisions of the emission control warranty.

Service and Maintenance

Warranted Parts

LIMITED 90 DAY WARRANTY