To Next PageTo Next Page
Need help?Do you have a question about the Central Machinery 97869 and is the answer not in the manual?
General| Brand | Central Machinery |
|---|---|
| Model | 97869 |
| Category | Dust Collector |
| Language | English |
Read all safety messages following the safety alert symbol to avoid injury or death.
Instructions to prevent electric shock, fire, and serious injury from power tool use.
Ensure switch is OFF before plugging in; don't carry with finger on switch.
Tools uncontrollable by switch are dangerous and must be repaired.
Check for misalignment, binding, breakage; repair damaged tools before use.
Use only identical replacement parts to maintain the safety of the power tool.
Ensure switch is OFF before plugging in; prepare to work before turning on.
Check grounding, do not modify plug, use if cord/plug is damaged.
Tools with 3-prong plugs must be connected to a properly grounded outlet.
Extraction system hose must be grounded to ensure there is no explosion.
Using inadequately sized wire causes voltage drop, loss of power, and tool damage.
Replace or repair damaged extension cords by a qualified electrician.
Read all safety information before set up or use.
Read the entire manual, check parts list and assembly diagram before assembling.
Use a 3-pole receptacle; extension cords must be 3-pronged and rated.
Entrust complex maintenance procedures to a qualified technician.
Turn Power Switch OFF and unplug before inspection, maintenance, or cleaning.
Do not use damaged equipment; correct noise/vibration issues before use.
Damaged power cords must be replaced by a qualified service technician.
Possible causes: No power at outlet, Cord not connected. Check power and connection.
