USER MANUAL
GB
SAVE THIS MANUAL FOR FUTURE REFERENCE6
CHARGING PROCEDURE
NOTE: Before using the charger, read the instruction book carefully.
HOW TO USE YOUR CHARGER
1. Plug charger directly into an electrical outlet. DO NOT ABUSE THE CORD. Never carry charger by
cord. Do not disconnect the charger from the outlet by pulling it by the cord.
2. CAUTION: To reduce the risk of re, electrical shock, or personal injury do not attempt to use this
charger with any other product.
Likewise, do not attempt to charge the mower with any other charger.
3. Do not operate a damaged charger. Replace damaged cords or charger immediately at an authorized
Central Park
@
service depot.
4. Do not charge in wet locations. Do not charge mower when temperature is above 104°F (40°C) or
below 41°F (5°C).
5. Keep the mower and charger away from water, heat sources, (such as radiators, heaters, stoves...etc.)
ames, or chemicals. Be careful not to damage the charger cord, by keeping cord away from sharp
edges.
CONNECTING THE CHARGING STATION
1. When connecting the charging base’s power cord to the adapter, align the notch on the power cord (b)
with the groove on the adapter (a).
2. Connect the charger’s power cord to a wall socket. It is preferable to use an earth-fault breaker as
recommended.
a
b
C) CHARGING A DISCHARGED BATTERY
When Central Park
@
is new or has been stored for a long period, the battery will not be charged and needs
to be charged before starting.
1) Place Central Park
@
in the working area.
2) Press on/off button to start. Press HOME then OK to send Central Park
@
back to the charging base.
3) The charging base green light will be ashing, Central Park
@
will begin to charge.
To Next Page
Loading...