Do you have a question about the Centralite Pearl Thermostat and is the answer not in the manual?
Explains how humidity affects perceived temperature and potential use with sensors.
Discusses energy savings through programmed setbacks and occupancy sensors.
Details intuitive touch controls and slide-up/slide-down adjustments.
Confirms compatibility with ZigBee HA 1.2 certified hubs and devices.
Highlights built-in power amplifier for range and over-the-air updates.
Instructions to enable the ZigBee network for joining via controller interface.
Action to remove battery tab initiating network search.
Procedure for resolving issues by replacing batteries.
Steps to perform a factory reset and rejoin a network.
Details RF protocol, strength, channels, and range.
Explains how humidity affects perceived temperature and potential use with sensors.
Discusses energy savings through programmed setbacks and occupancy sensors.
Details intuitive touch controls and slide-up/slide-down adjustments.
Confirms compatibility with ZigBee HA 1.2 certified hubs and devices.
Highlights built-in power amplifier for range and over-the-air updates.
Instructions to enable the ZigBee network for joining via controller interface.
Action to remove battery tab initiating network search.
Procedure for resolving issues by replacing batteries.
Steps to perform a factory reset and rejoin a network.
Details RF protocol, strength, channels, and range.
| rated voltage | 24V |
|---|---|
| battery voltage | 3V |
| battery type | AA (4x) |
| battery life | 2 to 3 years |
| operating temperature range | 0° to 40°C |
|---|---|
| storage temperature range | -20° to 50°C |
| humidity range | 0 to 90% RH (non-condensing) |
| protocol | ZigBee HA 1.2 |
|---|---|
| TX strength | +20 dBm |
| RF channels | 16 |
| range | 300+ ft. (90+ m) L.O.S. |
| temperature accuracy | ±0.4 °C (max), –10 to 85 °C |
|---|
Loading...