Centroid Acorn Plasma Users Manual Beta CNC12 v4.65 rev6
With the Hypertherm unit wired as per the Centroid provided Schematics.
Jog the Torch a good distance above any metal and test fire the torch in the air.
Press the “Torch Test FIRE” button on the VCP and observe the Torch.
The “Torch Test FIRE” button is a momentary button.
Momentary = as long as the button is depressed the Torch will be on.
Does the Torch Turn on practically instantaneously with the “Torch Test Fire” button? How much delay is
observed.
Page 22 D:\Keith Documents\centroid_acorn_plasma_users_manual_draft27.odt rev27 3-15-22
To Next Page
Loading...