Status of delivery, additional equipment
STATUS OF DELIVERY
ADDITIONAL EQUIPMENT
- temperature sensors PT1000 (2 pcs. for storage tank, 2 pcs. flow line,
1 pcs. domestic hot water and 1 pcs. outdoor sensor)
- code key (14kW / 20-35kW / 40-50kW / 60-90kW), in a nylon bag (an authorized service
technician must install the correct code key depending on the burner power to which the
CPREG-Touch control is connected))
Temperature sensors that come with controller:
- 1 x sensor boiler (PT 1000)-PVC, factory installed
- 1 x outdoor sensor (PT 1000), in its own cardboard box
- 5 x sensor (PT 1000)-PVC, (including 2 x (PVC handhold, PVC shoelace, paste for mounting
sensors on the pipe)), in a nylon bag
Safety thermostat (STB) (factory installed to the controller):
- STB thermostat switch-off temperature 110-9 °C
CAL set
for alarm
(speaker /
light )
CM2K modul
for steering
2+ heating
circuits
CMNET module
for steering the
boiler cascades
GSM module
for the alarm
alert by mobile
network
Vacuum
supply of
pellets
Cm Wifi-box
(Internet
boiler operation
monitoring)
- air cleaning
- burner flap (14-50)
- pellet level sensor in the tank CPSP / CPSP 70-110
Technical instructions CONTROLLER - CPREG-Touch
6
To Next Page
Loading...