English | 23
OPERATION
Electrical Connection
The appliance must be protected extra according to the power regulations
in order to protect the user against dangerous electric shocks in the case of
defects.
If the socket is for a three-pin plug, a three-pin plug is used and the wire
with yellow/green insulation must be connected to the earth terminal
(marked ).
If the socket is for a two-pin plug, a two-pin plug is used. If you assemble this
one yourself, the wire with yellow/green insulation must be cut o as close as
possible to the place where it enters the plug.
When changing the power cord, it must be replaced by a power cord of
corresponding type. In no circumstances cut in or remove parts from the
electric circuit.
To Next Page
Loading...