Century UK RAZOR CX 2.4G User Manual

ryffiw.:'tl
JrP'-u
Century
UK
21tL\7AA
D
GXA"4@
User
Handbook
n
*--
:',-*.
Specifications:
Main Rotor Dia. A:480 mm
Tail Rotor
Dia" B
:480
mm
Overall Length: 600 mm
All-up
Weight:
4609
(Battery
included)
Transmitter:
CUK-2401
DriveMotor: 2"3805H
Battery: 11.'1V 1500mAh
Li-Po
Gyro: Built-in
Servo: weight:
8.49
speed: 0.'l 2sec/60"
(4.8V)
torque:'1 .4kgf.cm(4.8V)
dimension : 22.5X1 1 .5X24mm
Features:
1)CNC-Metal full
option
rotor head with super stable
coaxicial design. Highly efficient
and easierto fly than a
traditional model helicopter.
2)
Utilizing
the
new 2.4GHZ technology which uses
precise
code
pairing
allowing multiple
models to
be
flown
at the same time.
3) Fitted
with the high spec 4-in-'1 receiver with built in ESC, Rate
adjustment and stabilizing
Gyro.
4)
Two high
performance
3805H
motors
powered
by a 11.1v
high capacity Li-po
battery
giving
up
to
10 minutes
flight
time.
5) Construction is
both
light
and strong utilising
state of
the art materials
giving
a
prompt
response
and accurate
control.

Century UK RAZOR CX 2.4G Specifications

General

Brand	Century UK
Model	RAZOR CX 2.4G
Category	Toy
Frequency	2.4GHz
Control Type	Radio Control

Summary

Specifications

Features

Matters Needing Attention

Safety Needing Attention

Crucial safety guidelines for operating the RC helicopter to prevent accidents.

Attention Before Flight

Essential checks and procedures to perform before starting a flight.

Instruction and Attention of CUK-2401 Transmitter

Code Pairing and its Attention

Guides on how to pair the transmitter with the helicopter receiver.

Instruction and Attention of Receiver

Instruction and Attention of Servo

Specification and Function of Servo

Connection and Adjustment of Servo

Instruction and Attention of CUK005 Balance Charger

Parameters of CUK005 Balance Charger

Features of CUK005 Balance Charger

Instruction of CUK005 Balance Charger

Operation Steps

Maintenance of Battery Pack

Steps of Flight

Installation of Battery Pack

CG Balance

Explains how to check and adjust the helicopter's Center of Gravity for stable flight.

Turn on the Power

Step-by-step procedure for powering on the transmitter and helicopter.

Troubleshoot of Receiver LED Keeping on Flashing after Power Cable Connected

Identifies common causes and solutions for receiver LED flashing issues.

Adjustment Before Flight

Pre-flight checks and adjustments to ensure safe and optimal performance.

Inspection of Swashplate

Guidance on checking the swashplate for proper alignment and condition.

Swashplate Adjustment

Steps to adjust the swashplate for correct helicopter control.

Adjustment of Main Rotor Blade

Guidance on inspecting and adjusting the main rotor blades.

Appendix 2 - Trimming the Flight Actions

Appendix 3 - Flight Practice

Flight Practice for the Beginner

Advanced Practice