High-Speed Internet
Installation Guide
STEP 1 - Installing Filters
A lter blocks any data “noise” that could affect a telephone
call. Place a lter on any telephone line that uses the same
phone number as your HSI service, including fax machines,
answering machines and satellite dish connections. DO NOT
place a lter on the telephone line that connects to the router
or gateway.
1. Remove the telephone line cord from the phone jack.
2. Insert the lter connection into the phone jack.
3. Insert the telephone line cord into the connection on the
other side of the lter.
4. Repeat this process for each telephone line that uses the
same telephone number as your HSI line.
IF YOU WANT TO USE A PHONE AT THE SAME
JACK AS YOUR MODEM, BE SURE TO USE
THE DUAL FILTER PROVIDED.
In This Kit, You Received the Following:
Thank you for purchasing CenturyLink™ High-Speed Internet. This instruction sheet will
guide you through three easy steps to install your CenturyLink™ HSI service.
CenturyLink™ 660 Series Router Westell 7500 Gateway
OR
Power Plug Telephone Cord Ethernet Cable
(2) In-line
Filters
Dual Filter
Appearance of equipment may vary slightly. Filters may or may not be included.
If you received lters in your kit:
030-300046 1122138
To Next Page
Need help?
General