Ceragon FibeAir 3200T User Manual

FibeAir
®
1500P
1500HP
1500SP
3200T
High & Ultra High Capacity
Wireless Network Systems
Installation and
Operation Manual
Part ID: BM-0080-0
Doc ID: DOC-00013447 Rev a.03
July 2006

Ceragon FibeAir 3200T Specifications

General

Brand	Ceragon
Model	FibeAir 3200T
Category	Antenna
Language	English

Summary

Safety Precautions

Fiber Optic Line Precautions

General Equipment Precautions

Chapter 1 Introduction

FibeAir 1500P Overview

Introduction to the FibeAir 1500P modular network connectivity solution.

FibeAir 1500HP Features

FibeAir 1500P & FibeAir 1500HP Integration

FibeAir 1500SP Overview

FibeAir System Components

Chapter 2 Theory of Operation

FibeAir 1500P Operation

Detailed explanation of the FibeAir 1500P's theory of operation and dual polarization.

FibeAir 1500HP System Components

FibeAir System Specifications

Technical specifications for FibeAir systems including capacity, modulation, and configurations.

Radio Specifications

Network Management, Diagnostics, Status, and Alarms

Chapter 3 Installation

General Installation Requirements

General guidelines and requirements for installing FibeAir hardware components.

Before Installing the ODU/RFU

Safety warnings and flange specifications before ODU/RFU installation.

Required Components and Equipment

Important Power Supply Connection Notes

Installing the Antenna and ODU

Detailed steps for assembling and mounting the antenna and ODU.

Initial Antenna Alignment

Procedures for aligning the antenna using a headset and checking signal levels.

Installation Verification

ODU Installation for a 6/7/8 GHz System

Specific installation steps for ODU in 6/7/8 GHz systems using an external diplexer.

6-8 GHz Frequency Diversity and 2+0 System Installation

6-8 GHz 1+1 System Installation

Installing FibeAir 1500HP Split-Mount RFU (1+0/1+1)

Procedure for installing FibeAir 1500HP RFU in a split-mount configuration.

Installing FibeAir 1500HP Split-Mount RFU (2+2, XPIC)

Installation steps for FibeAir 1500HP RFU in a 2+2 XPIC configuration.

Installing FibeAir 3200T All-Indoor RFU

Procedure for installing FibeAir 1500HP in an All-Indoor configuration.

Installing the FibeAir 1500SP ODU

Installation guide for FibeAir 1500SP ODU in 1+0 and 1+1 configurations.

XPIC Installation and Commissioning

Procedure for installing and commissioning the XPIC feature in a dual polarization configuration.

Chapter 4 Initial System Setup

General System Setup Overview

Overview of initial IDU setup and configuration procedures.

Connecting to the IDU via Serial Port

Defining IP Addresses

Procedure for configuring IP addresses for FibeAir Ethernet and serial interfaces.

Additional Setup Using CeraView

Procedures for connecting to Ethernet and installing CeraView software.

Starting CeraView

Setting the Local Tx Frequency Channel

Chapter 5 Operation

System Requirements for CeraView

CeraView Installation Procedures

Step-by-step guide for installing CeraView for HP OpenView, SNMPc, and Standalone.

CeraView Configuration Utility

Using the utility to configure CeraView operation parameters and server connections.

CeraView Security Management

Setting up user and group access rights for CeraView components.

Logging in to CeraView

ODU/RFU Configuration

Configuring ODU and RFU parameters such as frequency, XPIC, and transmit level.

Interface Configuration

Configuration of STM1, Fast Ethernet, Gigabit Ethernet, DS3/E3, E1/T1, and Radio interfaces.

Management System Configuration

Setting up IP configuration, trap forwarding, and SNMP parameters.

Alarms and Performance Monitoring

Viewing current alarms, alarm logs, and performance monitoring data.

Maintenance Operations

Performing loopbacks, software resets, hardware resets, and configuration management.

Protection Configuration

Configuring protection types, switch criteria, and diversity parameters.

Chapter 6 Troubleshooting

General Troubleshooting Approach

Steps for diagnosing and resolving system problems: symptom definition, isolation, understanding.

IDU LED Indicators and Functions

Alarm List with Corrective Actions

Comprehensive table listing trap IDs, descriptions, probable causes, and corrective actions.

Fault Isolation using Loopbacks

Connection Fault Guide

Chapter 7 Protection Configuration

Theory of Operation for Protection

Protection Switch Triggers

FibeAir 1500P Protection Configurations

Switching Criteria and LED Indications

6-15 GHz System Diversity Protection

FibeAir 1500P Protected 2+2 Configuration