Ceriotti C3000 User Manual

NOTE:
- The Company declines all responsibility for any injury to persons or damage to things
caused by installation or assembly that has not been carried out in compliance with the
General Warnings, or using supports and/or accessories other than those manufactured
by us, or for any injury to person or damage to things caused by installation or assembly
that have been carried out by non-specialized or non-authorized sta.
- In the case of the wall-mounted arm, the Company moreover declines all responsability
fo injury or damage resulting from the unsuitabilityof any support made of masonry or
other material.
IGNITION OF THE APPARATUS
Press green luminous switch place over the control panel.
PROGRAMMING WORKING TIME
Set the working time from 0 to 60 minutes by turning the timer knob (A)
clockwise. When the time has elapsed, the knob returns automatically to the “0”
position. During operation of the apparatus, you can at any moment turn the
knob counter clockwise to take it back to “0”, thus using it as a switch.
PROGRAMMING OF TEMPERATURE
Set the desired working temperature by turning the knob (C) of the thermostat
clockwise.
PROGRAMMING OF VENTILATION
Set the desired ventilation from 0 to 4 by turning the knob (B) clockwise.
USE OF THE SWITCHES
Use the switches(D) in order to ignite or to extinguish every single lamp.
A
C
B
D

Ceriotti C3000 Specifications

General

Brand	Ceriotti
Model	C3000
Category	Industrial Equipment
Language	English