Need help?Do you have a question about the Certa CTJMPSTW16A and is the answer not in the manual?
Insert the smart battery clamp plug completely into the jump starter.
Connect red clamp to positive (+), black clamp to negative (-) terminal.
Attempt to start the car. Wait 30 seconds before retrying if unsuccessful.
Hold the force start button for 3 seconds to start if car battery voltage is low.
Remove the battery clamp from the car battery and jump starter within 30 seconds.
Explains the meaning of different red/green light combinations on the battery clamp.
General| Model Number | CTJMPSTW16A |
|---|---|
| Engine Start | Yes |
| Engine Stop | Yes |
| Door Lock | Yes |
| Door Unlock | Yes |
| Trunk Release | Yes |
| Range | Up to 600m |
| Remote Type | 2-Way |
To Next Page