Certikin SALT EXPERT-3 Series User Manual

Certikin SALT EXPERT-3 Series

15 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

SALT EXPERT-3 Series

Salt Chlorinator

OPERATING INSTRUCTIONS

Questions and Answers:

M
michael82Aug 1, 2025
Why is my Certikin Water Filtration System not producing chlorine?
- J
  Jim VaughnAug 1, 2025
  If your Certikin Water Filtration System isn't producing enough chlorine, there are several potential causes. First, check that all cables are securely connected to the cell. Ensure the timer period is sufficiently long and the chlorine output level is appropriately high. Backwash the filter. Also, verify that the pH level is correct, the pool stabilizer is between 30 and 60 ppm, and the salt level is above 4000ppm.
K
Kevin GonzalezAug 11, 2025
What to do if the display on my Certikin Water Filtration System is blank?
- A
  ahuntAug 11, 2025
  If the display on your Certikin Water Filtration System is blank, ensure the controller is plugged in and that mains power is available. Also, check the fuse and replace it with a 3 amp slow blow fuse if it has blown.

Certikin SALT EXPERT-3 Series Specifications

General

Brand	Certikin
Model	SALT EXPERT-3 Series
Category	Water Filtration Systems
Language	English

Summary

Installation

Control Box Installation

Steps and considerations for mounting the control box.

Cell Installation

Guidelines for correctly positioning and connecting the chlorinator cell.

Pool Preparation

User Panel and Operation

User Panel (T Model)

Overview of the user panel features for the T model.

User Panel (S Model)

Overview of the user panel features for the S model.

Programming (T Model)

Instructions for setting the clock and timers on the T model.

Chlorine Output Control

Details on controlling and displaying chlorine output levels.

User Mode (T Model)

Explanation of User Mode functions for the T model, including Pool and Spa modes.

User Mode (S Model)

Explanation of User Mode functions for the S model, including Pool and Spa modes.

Warnings Display

Description of warning indicators like Low Salt and No Flow.

Chlorine Output Level

Detailed explanation of chlorine output levels and their indicators.

Safety Backwash

Procedure for using the safety backwash function.

Run Dry Safety Feature

Explanation of the automatic pump shut-off for dry running.

General Operation and Pool Chemistry

Chlorine Output and Filtration Time

Recommendations for daily operating hours for summer and winter.

Stabiliser, pH, and Alkalinity

Recommended ranges for stabiliser, pH, and total alkalinity.

Salt Level

Importance of salt level, recommended range, and initial setup.

Chlorinator Maintenance and Troubleshooting

Cell Maintenance

Instructions for cleaning the chlorinator cell, including chemical use.

Troubleshooting (T Model)

Table of faults, potential causes, and remedies for the T model.

Troubleshooting (S Model)

Table of faults, potential causes, and remedies for the S model.

Warranty