CESAB S200 Series - Page 58

Product details
Product guide – CESAB S200
58
Mono mast
A centrally positioned mast with the chain inside
the truck prole. It is suitable for low lift heights
where the operator often works close to the truck,
e.g. when using it as a work table. Only available
on the S208L.
Feature
The mono mast has a closed prole, i.e. the chain
runs inside the mast prole.
Benet
It is easy to move around the mast with a very
small risk of crushing injuries.
Simplex
The Simplex mast relies on a single frame. Available on till S210, S212, S212L
and S212S.
Feature
The forks travel inside the frame prole.
Benet
Maximum mast height remains the same even during lifting. A simple solution that
suits applications not requiring high lift heights.
Duplex Tele
This mast uses two sections and a centrally loca-
ted cylinder. Available on S210, S212, S212L,
S212S and S220D.
Feature
The Duplex Tele mast has a free-lift range of 76
mm.
Benet
Because the pallet can be lifted from the oor, it
is possible to transport goods horizontally wit-
hout raising the mast and increasing its minimum
height. Especially useful if the site has low ceiling
clearance or doorways.