CESAB S200 Series - Aisle Width Requirements and Calculations

Technical information
Product guide – CESAB S200
71
A
st
– Aisle width requirement
The aisle width requirement can be described as the space required by the truck to
pick a pallet from a pallet rack, reverse out into the aisle, turn and proceed down
the aisle.
The formula, according to VDI, to calculate the aisle width requirement (in mil-
limetres) is:
Standard:
A
st
= W
a
+ √(length of pallet - x)
2
+ (
width across pallet
)
2
+ 2×100
2
Note: In this formula, the safety distance is always assumed to be 2×100 mm.