Product details
Product guide – CESAB S200
50
Feature
The castor wheels always swing inside the truck
prole.
Benet
This reduces the risk of foot injuries, while cutting
down on damage to the wheels and goods. This is
a clear advantage in the case of block stacking.
Feature
The lower part of the frame is compression-moulded.
Benet
The moulding makes the truck more rigid while it
absorbs impacts in an area where it is most needed,
thus protecting the various truck functions.
Feature
Floor clearance, i.e. the distance between the oor
and bumper, is 35 mm.
Benet
This short distance protects the operator's feet from
being run over by the truck wheels.
Feature
All corners are rounded.
Benet
This provides excellent manoeuvrability in con-
ned areas and reduces the risk of impact and the
truck becoming caught in obstacles.
There is a rubber border is available for S208L.
The trucks can be ordered with a rubber border
instead of the standard steel border to allow high
gradient ramp handling ability. The rubber border
is especially suited for applications with high
thresholds, curbs and ramps with high gradients. The rubber is strong enough not
to compromise the foot protection but when driving over xed obstacles like high
thresholds or high gradient ramps the rubber border will bend.
To Next Page
Loading...
Need help?
General
