Options
Product guide – CESAB S200
94
Feature
A service technician must program the size and type of battery. If the battery is
replaced, parameters can easily be changed.
Benet
Optimised charging even if the battery is replaced during the truck's lifetime.
Feature
Any error codes generated by the battery char-
ger are displayed on the display.
Benet
This simplies fault diagnosis if required.
Feature
When the built-in charger is used, it is not possible to charge the battery unless the
battery cover is opened since the power cord needs to be pulled out from behind
the cover.
Benet
Opening of the cover assures proper ventilation during charging.
Feature
The number of Ah charged into the battery during the past 50 charging instances
can be veried. For more information, see the service manual.
Benet
It is possible to monitor battery care.
To Next Page
Loading...
Need help?
General
