CESSNA AIRCRAFT
COMPANY
SINGLE ENGINE
STRUCTURAL REPA
IR MANUAL
HORIZONTAL AND VERTICAL STABILIZERS
1. General
A. Chapter 55 describes general repair practices, materials and procedures which are applicable to the
Horizontal and Vertical Stabilizers.
B. The horizonta
l and vertical stabilizers are of all metal, fully cantilever, semimonocoque design,
consisting of spars, stringers, ribs, and skins. Skins are riveted to supporting structure with
conventional MS20470AD rivets.
C. If questions a
rise concerning approved repairs or for repairs not shown in this section, contact Cessna
Propeller Aircraft Product Support.
55-00-00 Page 1
© Cessna Aircraft Company Jun 1/2005
To Next Page
Loading...
