Need help?Do you have a question about the cetoni Nemesys S and is the answer not in the manual?
Details revisions and changes made to the manual over time.
Provides a welcome message and contact information for support.
Explains the meaning of symbols and keywords used throughout the manual for clarity.
States compliance with relevant European directives and safety standards.
Defines the general description, intended use, and foreseeable faulty applications of the device.
Details essential safety precautions for device operation and handling.
Outlines specific measures for safe operation and environmental conditions.
Defines warranty duration, conditions, and limitations of liability for the device.
Specifies operating and storage environmental conditions like temperature and humidity.
Provides physical specifications including dimensions and weight of the device.
Details electrical parameters such as supply voltage and power consumption.
Describes available interfaces like CAN, RS-232, and accessory ports.
Presents a visual representation of the device with key dimensions.
Outlines minimum, maximum, and pulsation-free speeds and flow rates for various syringes.
Lists materials used in parts that come into contact with the fluid medium.
Specifies materials for syringe components in contact with media.
Details materials used in different types of Contiflow valves.
Guides through the initial setup process, including connecting and switching on the device.
Explains how to assign and configure the Contiflow Valve within the software.
Describes the dead volume free syringe holder and its suitability for small syringes.
Provides step-by-step instructions for mounting SETonic glass syringes onto the device.
Explains fluidic connections for continuous fluid dispensing using Contiflow valves.
Details how to operate the device in an upright position using the stand foot for stability.
Describes the accessory port for integrating additional components like valves and sensors.
Details the physical connection and configuration of the RS-232 interface for communication.
Details the pin assignments for the PLUG and SOCKET of the RS-232 interface.
Explains the connection and use of the OEM RS232 cable for system communication.
Specifies the necessary communication settings for serial interface connection to a PC.
Illustrates the pin assignment between the Nemesys interface and the 9-pin D-Sub socket.
Describes the device's overload protection mechanism and force measuring capabilities.
Provides instructions for removing and replacing the syringe holder on the device.
Details the procedure for removing and installing a new piston holder for the syringe.
Explains the use and mounting procedure for the universal syringe holder.
Provides guidance on using special SETonic glass syringes with the Nemesys S.
Details the process and requirements for returning glass syringes to the manufacturer.
Outlines the warranty terms and conditions for SETonic glass syringes.
General| Brand | cetoni |
|---|---|
| Model | Nemesys S |
| Category | Water Pump |
| Language | English |
To Next Page