45
OPERATING YOUR VEHICLE
Ref Symbol Function
1
Flash Indicator ashes when the turning light turns on.
2
Keep on Position light indicator will be on when position light turns on�
3
Keep on
When electric circuit is connected and engine is off, EFI fault
indicator will be on� If the engine is not off and the indicator
is still on, it means the vehicle detects any fault, the fault will
be displayed on the dashboard for warning� Please stop the
vehicle in place according to trac regulations when EFI fault
indicator is on and contact your CFMOTO dealer soon�
4
Flash / Keep on
When the vehicle is powered on, the ABS indicator will flash
until the vehicle begins to move at speeds above 3-5 mph (5km/
h~8km/h) and remains off until the next power on or a fault
occurs� This is normal�If a fault is detected, the ABS indicator
turns on and stays on� The ABS is automatically deactivated
in a fault condition, but the vehicle retains full basic braking
function� Please drive at slow speeds, avoid hard braking, and
contact your CFMOTO dealer as soon as possible�
5
Keep on High beam indicator will be on when high beam lamp turns on�
To Next Page
