How to warm up CF MOTO 600 Offroad Vehicle in cold weather?
To avoid belt burning, warm the engine of your CF MOTO Offroad Vehicle before driving when exposed to low ambient temperatures. This will make the belt more flexible.
What to do if my CF MOTO 600 Offroad Vehicle has a clogged fuel filter?
If your CF MOTO Offroad Vehicle has a clogged fuel valve or filter, inspect and clean or replace it.
What to do if my CF MOTO 600 has belt slippage due to water?
If your CF MOTO Offroad Vehicle experiences belt slippage from water or snow ingestion into the CVT system, remove the CVT cover and drain the water from CVT.
What to do if my CF MOTO 600 is stuck in mud or snow?
If your CF MOTO Offroad Vehicle is stuck in mud or snow, shift the transmission to low range. Carefully use fast, aggressive throttle to engage the clutch. Be cautious as excessive throttle can cause loss of control and vehicle overturn.
How to prevent belt burning when loading CF MOTO 600 Offroad Vehicle?
To prevent belt burning when driving your CF MOTO Offroad Vehicle onto a pickup or tall trailer, shift the transmission to low range during loading.
How to fix fouled spark plugs in CF MOTO 600?
If your CF MOTO Offroad Vehicle has fouled or defective spark plugs, inspect the plugs and replace them if necessary.
What to do if the circuit breaker tripped in my CF MOTO Offroad Vehicle?
If your CF MOTO Offroad Vehicle has a tripped circuit breaker, reset the breaker.
How to fix loose battery connections in CF MOTO 600 Offroad Vehicle?
If your CF MOTO Offroad Vehicle has loose battery connections, check all connections and tighten them.
What to do if there is water in the fuel of my CF MOTO 600 Offroad Vehicle?
If there is water present in the fuel of your CF MOTO Offroad Vehicle, drain the fuel system and refuel.
What to do if my CF MOTO Offroad Vehicle has poor quality fuel?
If the fuel in your CF MOTO Offroad Vehicle is of poor quality or has low octane, replace it with the recommended fuel.
General| Brand | CF MOTO |
|---|---|
| Model | 600 |
| Category | Offroad Vehicle |
| Language | English |
Explains the 2WD/4WD switch and differential lock for terrain selection.
Details on checking brake pedal, fluid level, leakage, and operation.
Ensures engine oil is at the specified level and provides oil specifications.
Step-by-step instructions for starting the engine from cold.
Specifies requirements for the driver, including age and licensing.
Details requirements for passengers, including seating and ability to brace.
Advice on operating the UTV on various surfaces and terrains, including hills.
Instructions for pre-ride checks before performing periodical maintenance.
Procedures for checking and changing engine oil and oil filter cartridge.
Lists common possible causes and solutions for operational issues.
Table of instrument cluster error codes, failure descriptions, and defect types.
Specifies the type and quantity of recommended engine oil.
To Next Page