CF MOTO CF500-3/UTV - Page 74


&RROLQJDQG/XEULFDWLQJ6\VWHP
 
Performance Check
Checking coolant density
Note:
Open the radiator cap after coolant is fully
cooled.
Remove:
Front top cover
Radiator cap (counter clockwise)
Check with a densimeter if the coolant den-
sity adapts to the local temperature.
Check coolant for stains or impurities.
Inspection of radiator cap
Note
Open the radiator cap after the coolant is fully
cooled.
Remove:
Front top cover 
Radiator cap 
Note
Apply coolant on the sealing surface of radia-
tor cap before attaching the tester to the ra-
diator cap.
Install the radiator cap tester to the radiator
cap;
Apply the specified pressure (radiator cap
opening pressure) for 6 seconds and make
sure that there is drop in pressure.
Opening pressure of radiator cap:
108k 3D 

1.1 kgf/cm


All manuals and user guides at all-guides.com