CF MOTO ZFORCE 800EX - Page 138

134
MAINTENANCE
Break-In Maintenance Checklist
Perform these maintenance items when the vehicle break-in is completed:
Item
Break-in Maintenance
(Perform at the interval that arrives r󰀬)
Hour Calendar Miles (km) Remarks
General lubrication
20 - 200 (320)
Lubricate all grease points,
pivots, cables, etc.
Engine oil / oil lter /
oil 󰀬rainer (500/1000 only)
20 - 200 (320)
Change oil and lter. Clean oil
󰀬rainer.
► Engine air lter
20 - 200 (320)
Inspect; replace if dirty; do not clean
■ Engine valve clearance
20 - 200 (320)
Check and adju󰀬 as necessary.
Front / Rear gear case oil
20 - 200 (320)
Check level. Inspect for leaks.
Coolant
20 - 200 (320)
Check level. Inspect for leaks.
Transmission oil
20 - 200 (320)
Inspect level.
Engine hoses, gaskets and
seals
20 - 200 (320)
Inspect for leaks.
► = Severe Use Item. Reduce interval by 50% on vehicles subjected to severe use.
■ = Have an authorized dealer perform repairs that involve this component or sy󰀬em.
● = Emissions related components. Have an authorized dealer perform repairs that involve this component
or system.