Transporting the vehicle
Follow these procedures when transporting the vehicle on a atbed trailer:
• Turn o the engine and remove the key to prevent loss during transporting.
• Place the gear shift into any position except the parking position, then block the front and rear wheels
to prevent the vehicle from moving.
• Ensure the fuel cap is installed correctly and secure.
• Ensure the seats and access panels are installed correctly and secure.
• Remove any items from the vehicle not tied down or secure.
• Secure the front and rear of the vehicle frame to the transport using heavy-duty tie-down straps to
prevent the vehicle from sliding or moving.
CAUTION
Never transport with the gear selector in the parking position.
Damage to the transmission may result.
To Next Page
Loading...
