191
VEHICLE DIAGNOSIS
EPS Malfunction Indicator Light
The Electronic Power Steering system on your vehicle contains a self-diagnostic feature that will illuminate
the malfunction indicator light (MIL) if it detects a problem. In normal operation, the EPS indicator will be on
after the ignition switch is turned to ON, but EPS will not work. When the engine is started, the EPS indicator
will be o and the EPS starts to function.
EPS Malfunction Indicator EPS Assembly
Each trouble code consists of 2 digits, denoted by the times of long flash and short flash of EPS MIL
indicator. If there is a failure, the EPS indicator will start to ash. Do NOT switch o the machine. Check the
ash sequence of EPS indicator. Write down the ash sequence and contact your dealer for diagnosis. Your
dealer has the special tool required to diagnose, repair and clear trouble codes. Any codes will disappear
once the problem has been diagnosed and repaired by your dealer.
To Next Page