CF MOTO ZFORCE 800EX - Page 95

91
CONTROLS AND FEATURES
10
- Tail Light ‘ON’. This indicator displays when the main headlight switch is set to this position.
11
- 4WD Indicator. This dashboard section corresponds to the drive method chosen. The front di󰀨erential
gear case contains the synchronizing component that signals the display.
12
- Fuel Gauge. This dashboard section displays the current gas remaining in the tank. ‘F’ indicates full. ‘E’
indicates stand-by fuel. When the indicator enters the red area, the fuel remaining is approximately 3.5L (.92
gal). Fuel must be added as soon as possible.
13
- EFI Fault. This indicator light displays when a fault occurs in the Electronic Fuel Injection system.
14
- Clock. This dashboard section can be adjusted to the correct time. Long press the ‘SEL’ button to enter
the clock mode and use the right ‘ADJ’ button to adjust the hours and minutes.
15
- Speedometer. This dashboard section can be toggled to display the vehicle speed in Kilometers per
hour (Km/h) or Miles Per Hour (MPH).
16
- Engine Temperature. This dashboard section displays the current coolant temperature, ‘C’ is low