CFMoto 650NK - Specifications and Service Limit

PERIODIC MAINTENANCE 2-11
Specifi cations and Service Limit
Item Standard Service Limit
EFI
Throttle Grip Free Play
Idle Speed
Air Filter Element
2~3mm(0.08~0.12in.)
1300±130r/min(rpm)
Polyurethane Foam
Cooling System
Coolant:
Type(recommended)
Color
Mixed Ratio
Freezing Point
Total Amount
Permanent type of antifreeze
Green
Soft water 50%, Coolant 50%
–35°C(–31°F)
1.6L(1.7USqt)
Engine Top End
Valve Clearance
Exhaust
Intake
0.20~0.26mm(0.0078~0.0102in.)
0.08~0.13mm(0.0031~0.0051in.)
– – –
– – –
Clutch
Clutch Lever Free Play 2 ~3mm(0.08~0.12in.) – – –
Engine Lubrication System
Engine Oil:
Type
Viscosity
Capacity
Level
API SG or higher
SAE 15W-40
2.0L(1.8USqt)( when fi lter is not replaced)
2.2L(2.0USqt)( when fi lter is replaced)
2.6L(2.5USqt)( when engine is completely dry)
Between upper and lower level lines
(after idling or running)
– – –
– – –
– – –
– – –
– – –
– – –
Wheels/Tirs
Tread Depth:
Front
Rear
Air Pressure (when Cold):
Front
Rear
4.5mm(0.18in.)
5.5mm(0.22in.)
280kPa(2.80kgf/cm
2
,39.8psi)
280kPa(2.80kgf/cm
2
,39.8psi)
0.8~1.0mm
0.8~1.0mm
– – –
– – –