-102-
10.Install the radiator cap.
11.
Start the engine and let it idle for several minutes
.
Stop the engine
,and then check the coolant
level in the radiator. If it is low, add more coolant until it reaches the top of the radiator.
12.
Fill the coolant reservoir with coolant up to the upper limit.
13.Install the coolant reservoir cap and check for coolant leakage.
NOTE
If any leakage is found,have your dealer check the cooling system.
14. Install the panels and the front rack.
Maintenance & Lubrication
Axle dust boots
Check the protective boots for holes or wears.
If any damage is found, have them replaced by your dealer.
1
1
To Next Page