CFMoto CFORCE 850XC - Gear Shifting and Driving Procedures

Gear selector operation and reverse driving
CAUTION
Before shifting,
you must return the throttle lever to the closed
position and stop the ATV . Otherwise,
the transmission may
may be damaged.
Shifting：Neutral to High
1. Return the throttle lever to the closed position and stop the
ATV.
2. Push the button at the right side of gear selector ,
then shift
to High by moving the gear selector along the shift guide.
NOTE
Make sure that the gear selector is completely shifted into position.
3. Open the throttle lever gradually.
Shifting：High to Low
1. Return the throttle lever to the closed position and stop the ATV completely.
2. Apply the rear brake pedal, shift to Low by moving the gear selector along the shift guide .
-72-
Operation
1
1