88
Lights
Always check light operation prior to each use.
Replacing a headlight bulb
If a headlight bulb burns out, replace it as fol-
lows
1. Remove the back cover of the headlight by
turning it counter-clockwise.
2. Disengage the headlight bulb clamp.
3. Remove the headlight bulb.
WARNING
Wait for the headlight bulb to cool before
touching or removing it. Always wear gloves
to perform the bulb replacement.
4. Insert a new headlight bulb and engage the
bulb clamp.
5. Reinstall the headlight back cover.
Headlight beam adjustment
CAUTION
It is advisable to have your dealer make this
adjustment.
To adjust high beam, turn the screw #1.
To adjust low beam, turn the screw #2.
1. Hi beam adjustment screw
2. Lo beam adjustment screw
Tail/brake light/turn signal light bulb
replacement
Brake/tail lights, rear turn signal lights and
front position lights are LED type. Have your
dealer replace the entire light if a bulb is dam-
aged.
1
1
2
To Next Page
Loading...