CFR Altra Pro 1000 - User Manual

Details the Altra Pro 400 model for carpet, upholstery, and hard surfaces.

Highlights the Altra Pro Heat 400 with its integrated heater.

Describes the Altra Pro 1000, its high pressure, and power.

Emphasizes reading all instructions and warnings before operating the unit.

Clarifies the intended commercial application of the product.

Critical electrical safety measures to prevent hazards like shock and fire.

Explains the importance and method of proper equipment grounding.

Outlines the first steps to take before operating the machine, including warranty registration.

Step-by-step instructions for installing the main filters.

Steps for filling the tank, adding cleaner, and connecting hoses.

Details the correct sequence of operations, including priming and switch usage.

Guidance on the cleaning process, monitoring fluid levels, and managing foam.

How to connect the hose assembly and attach the cleaning tools.

Proper techniques for cleaning carpets with the provided tools.

Correct procedures for cleaning upholstery effectively.

Daily cleaning and upkeep for tools, filters, and the tank.

Regular inspections and maintenance for motors, pumps, and filters.

Solutions for when the vacuum or pump motor does not run.

Troubleshooting for circuit breaker trips and power-related problems.

Addresses issues like pump pressure, excessive pressure drop, and motor operation.

Solutions for wet carpets, streaks, and no fluid dispensing.

Diagnosing and fixing leaks in the head assembly or dripping from the exhaust.