Need help?Do you have a question about the CG Antenna SB-2000 and is the answer not in the manual?
General| Brand | CG Antenna |
|---|---|
| Model | SB-2000 |
| Category | Recording Equipment |
| Language | English |
Replaces serial/parallel ports for PC communication, essential for modern computers.
Utilizes FT232R chip for reliable USB to serial conversion, supporting full speed.
Combines CAT, CI/V controller, and audio transformer for comprehensive radio interface.
Features optical and transformer isolation for digital and audio signals, enhancing EMC.
Device runs solely on power from the computer's USB port, no external adapter needed.
Lightweight (under 400g) and pocket-sized design for easy carrying.
Includes essential cables for connection and operation.
Enables radio control via CAT or CI/V protocols from your computer.
Facilitates operation of RTTY, PSK31, SSTV, FAX, and other digital modes using software.
Allows CW transmission/reception using a computer keyboard instead of a paddle.
Supports ECHOLINK for remote station control via internet (VoIP).
Feature to record SSB voice sessions.
Enables Frequency Shift Keying (FSK) operations.
Indicates PTT output status via RTS control signal.
Shows CW or FSK output status via DTR control signal.
Signals when the computer sends CAT/CI/V data to the transceiver.
Signals when the transceiver sends CAT/CI/V data to the computer.
25-pin DE-25 port for data, CAT, CI/V, and CW connections to the transceiver.
RCA jack connecting to the computer's audio output or speaker.
RCA jack connecting to the computer's audio input or microphone.
USB port for connecting to the computer's USB port.
Use provided cables; modern transceiver cables may also be compatible.
Connects transceiver data, audio, and USB ports to the computer.
Specifies required CPU, RAM, CD-ROM, USB port, and sound card for installation.
Step-by-step procedure for installing the software driver on Windows XP systems.
Confirms the assigned COM port number via Device Manager after installation.
Guides on setting up MMTTY and installing the COMFSK plug-in for FSK.
Details configuring EXTFSK for correct port, DTR (FSK), and RTS (PTT) usage.
RCA to 3.5mm audio jack cable with 600 ohms impedance.
Standard USB A-B cable for computer connection.
DE-25 cable for data, CAT, CI/V, and CW ports.
Cables for Yaesu FT mobile rigs with mini-din data & 8-pin CAT plug (ACC105).
Cables for Yaesu FT mobile rigs with mini-din data & DB9 CAT plug (ACC104).
Cables for Yaesu FT desktop rigs (ACC101).
Cables for ICOM 13-pin mobile transceivers (ACC103).
Cables for ICOM 8-pin desktop transceivers (ACC102).
Cables for Kenwood TS 13-pin transceivers (ACC106).
Cables for Kenwood TS mini-din transceivers (ACC107).
To Next Page