Do not leave the helmet near the muffler or other heat sources and in
summer, during stops, protect it from the sunrays.
Warning! Do not apply paint, sckers, petrol or other solvents or pro-
ducts that can compromise the reliability to this helmet. Never tamper
with the helmet and all its parts.
Keep the visors clean at all mes to ensure a good view. Marked or da-
maged visors must be replaced immediately as they are unsafe.
The visors marked "day me use only" are not suitable for use at night or
in condions of poor visibility.
Use only original CGM spare parts to avoid incompabilies and pro-
blems that could reduce driving safety.
Cleaning and maintenance
To clean the outer part of the helmet shell use warm water with mild soap.
Dry with so cloths and do not expose to heat sources.
To clean the visor use a soluon of mild soap and warm water and dry with
a so cloth. Do not use products such as alcohol, petrol, solvents, or other
alcohol-based products to clean glasses as they may damage the visor tre-
atments.
It is possible to clean the removable inner parts washing them by hand in
cold water. Leave to dry in the shade and at room temperature. Do not use
electric dryers as heat can damage materials. If the wear and aging are evi-
dent, we recommend to replace the inner lining with original CGM spare
parts. This in order to maintain comfort and safety over me, as a deterio-
rated padding can compromise the original size of the helmet with conse-
quent loss of opmal fing.
Duraon of use
Although CGMITALIA s.r.l engages to use high quality materials and com-
ponents, each helmet should, regardless of the material of the outer shell,
be replaced aer 3/5 years of average use.
EN
To Next Page
Loading...