DVD HOME THEATER
SYSTEM
–If Equipped
The available DVD home theater
system operates from 120-volt AC
household current only, so you must
have either the shoreline connected, the
generator running, or the inverter turned
on (if equipped).
The TV is connected to the Home
Theater System which plays through
theater speakers in the lounge area of the
coach.
Set TV Video Input
• Turn On both
TV and DVD
player
• Press TV/
VIDEO
or
INPUT button
on the remote or
front of TV and
select “Video
1
” input on the
TV.
The TV screen will display the DVD
player logo when the correct input is
selected.
Play DVD with Theater
Sound
• Insert DVD into player. DVD will
begin to ‘load’ automatically. TV
screen will typically show
“READING” or “LOADING.”
• The DVD may load directly
to the main title/menu screen
or it may begin to play
previews. You may be able to
skip previews if desired by
pressing the “NEXT” button
until you see the main menu screen.
• When the main
menu screen
appears, use the
arrow buttons on
the remote to
select the desired
entry or press the
ENTER or PLAY
buttons on the
remote (or “Play” button on DVD
player) to begin playing the feature.
• Volume is adjusted with the DVD
remote.
TV Sound through Home
Theater Speakers
When watching TV programs alone,
the TV normally plays sound through its
own built-in stereo speakers. If you wish
to connect TV stereo sound output to the
home theater speakers for a richer sound
quality, follow these steps:
• Follow DVD Home Theater steps for
power and TV input setup.
• Turn TV and DVD player On.
•Press FUNCTION button on DVD
player or remote to set DVD player to
“AV IN.”
• Use TV Menu button to set TV audio
output to “Variable Audio Output.”
(See TV owner’s manual.) This
routes TV stereo sound output
through home theater system.
• Select TV channels and adjust
volume with remote for either the TV
or DVD.
Continued—
To Next Page
Need help?
General