Need help?Do you have a question about the Challenge Xtreme BVA2400 and is the answer not in the manual?
General| Brand | Challenge Xtreme |
|---|---|
| Model | BVA2400 |
| Category | Blower |
| Language | English |
Cluttered work areas invite accidents and injury. Maintain a tidy environment for safe operation.
Avoid damp/wet locations, ensure good lighting, and stay away from flammable liquids or gas.
Use the tool at its designed rate for better and safer performance.
Employ the right tool for the job; do not use attachments for tasks they are not designed for.
Always wear safety glasses, ear protectors, and a face/dust mask.
Never pull the cord to disconnect. Keep it away from heat, oil, and sharp edges.
Switch off and disconnect power before servicing or changing accessories.
Check the switch is OFF before plugging in. Do not carry plugged-in tools.
Only use extension cords marked for outdoor use.
Watch what you are doing, use common sense, and do not operate when tired.
Before use, check for damaged parts, alignment, and proper mounting.
Protect face, eyes, hands, head, and hearing with appropriate gear.
Disconnect power when leaving unattended, cleaning, moving, or if cord is damaged.
Avoid operating the tool or plug in wet conditions or with wet hands.
Never vacuum liquids, especially flammable or combustible ones.
Avoid vacuuming burning or hot material like cigarettes or ashes.
Disconnect the tool from power after use and check for damage.
Do not try to repair the tool or access internal parts; contact authorized service centers.
If the blower vac vibrates excessively, switch off immediately and seek service.
Be familiar with controls and proper use. Never allow untrained persons or children to use.
Wear protective goggles while operating to prevent eye injury.
Before use, check supply and extension cords for signs of damage or aging.
Never operate with defective guards or shields.
If cord is damaged, disconnect immediately. Do not touch the cord before disconnecting.
Disconnect when leaving, clearing blockages, checking, cleaning, or if abnormal vibration occurs.
Guide to connecting wires (blue to N, brown to L) in the plug.
To Next Page