HELPLINE NO 08448012949
10
ORIGINAL INSTRUCTIONS
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your tool requires no additional lubrication
or maintenance.
There are no user serviceable parts in your
tool. Never use water or chemical cleaners
to clean your tool. Wipe clean with a dry
cloth. Always store your tool in a dry place.
Keep the motor ventilation slots clean.
Keep all working controls free of dust.
Occasionally you may see sparks through
the ventilation slots. This is normal and will
not damage your power tool.
To Next Page
Loading...
Need help?
General
