9
petrol before starting the engine.
4) Tighten the filler cap securely after
filling.
Refuel in a well-ventilated area with the
engine stopped. Do not smoke or allow
flames or sparks in the area where the
engine is refueled or where petrol is
stored. Avoid repeated or prolonged
contact with skin or breathing
of vapor.
Note: petrol should be stored in a
approved container. Never buy or store
more than 30 days supply of petrol. Do
not mix oil with petrol.
6. Starting the engine (Fig. E)
Warning! Do not operate the machine
in a closed or poorly ventilated areas
as the exhaust gas contain poisonous
substance. Keep hands, feet, hair and
clothing away from all the moving parts
of the machine.The exhaust and other
parts of the machine will become hot
during use. Make sure that the blade
is securely fastened before starting the
engine.
NOTE: To start the engine, make sure
that the spark plug cap is located on the
spark plug and the machine is filled with
Step1: Throttle lever-STARTING
To start a cold engine move the throttle lever
to the 'CHOKE' position (Fig E).
sufficient oil and petrol.
Step2: Engine cutout disengage
Pull the stop / start bar towards the upper
handle (Fig. E1) .
Step3: Pull cord handle
With right hand, slowly but firmly pull
the starter handle and rope out until
you feel resistance. Let the rope recoil,
then pull briskly. If the engine fails to
start after three pulls, repeat the start
process. When the engine starts, return
the starter rope gently.
Step4: Throttle lever-RUN
Once the engine is running, move the
throttle lever to the 'Max' position (Rabbit)(Fig.E).
ORIGINAL INSTRUCTIONS
To Next Page
Loading...