Challenge Xtreme XSZ40 User Manual

9
Warning! Do not operate the
machine in a closed or poorly
ventilated areas as the exhaust gas
contain poisonous substance. Keep
hands, feet, hair and clothing away from
all the moving parts of the machine. The
exhaust and other parts of the machine
will become hot during use. Make sure
that the blade is securely fastened
before starting the engine.
NOTE:
To start the engine, make sure that
the spark plug cap is located on the spark
plug and the machine is filled with sufficient
oil and petrol.
Step1: Throttle lever-STARTING
For start a cold engine, move the throttle
lever to the Choke position (Fig. E2).
For start a warm engine, move the throttle
level to the Rabbit position (Fig. E3).
Step2: Blade Control Lever
Lift the blade control lever towards the
upper handle (Fig.E4).
Step3: Pull cord handle(Fig.E5)
Slowly but firmly pull the starting knob
(4) and rope out until you feel resistance.
Let the rope recoil, then pull briskly. If the
engine fails to start after 2-5 pulls, repeat
the start process. When the engine starts,
return the starter rope gently.
Step4: Throttle lever-RUN
Allow the engine to run for approximately
30 seconds. Then, move the throttle level
to the position Rabbit position (Fig. E3).
6. STARTING THE ENGINE
ORIGINAL INSTRUCTIONS
HELPLINE NO 08454505299
5

Challenge Xtreme XSZ40 Specifications

General

Brand	Challenge Xtreme
Model	XSZ40
Category	Lawn Mower
Language	English