639782-1 1-9
Safety
FIG. 20:
17. Warning - Salt.
Make sure the machine is washed and clean of all
dirt and salt after the machine is delivered.
Located on front wind screen and will be removed
by your dealer.
FIG. 21:
18. Hazard - Danger poisonous substances.
Carefully read operator's manual before handling
the machine. Observe instructions and safety rules
when operating. Refer to the cautions specified by
the pesticide's supplier.
Located inside left storage compartment cover.
Follow the instructions given in the Controls
section.
FIG. 22:
19. Best Engine RPM for Max Pump RPM.
Set the engine RPM to 1250 to get the maximum
Pump RPM to fill the product tank.
Decal located near the eductor and operator
control station.
FIG. 20
FIG. 21
FIG. 22
To Next Page
Loading...