Chamberlain MC100 Manual

To prevent possible SERIOUS INJURY or DEATH from a moving
gate or door:
• ALWAYS keep remote controls out of reach of children.
NEVER permit children to operate, or play with remote control
transmitters.
• Activate gate or door ONLY when it can be seen clearly, is
properly adjusted and there are no obstructions to door travel.
• ALWAYS keep gate or door in sight until completely closed.
NEVER permit anyone to cross path of moving gate or door.
* LiftMaster
®
, Do-It
®
, Master Mechanic
®
, Raynor
®
, True Value
®
and
Sears Craftsman
®
are compatible with Chamberlain technology.
**Visit www.chamberlain.com/MC100 for Genie
®
Intellicode II instructions.
Read instructions thoroughly BEFORE beginning.
If using the Universal Garage Door Mini Remote
Control with residential door openers, the remote
control must be used only with door openers
manufactured after 1993 that utilize photoelectric
sensors. The photoelectric sensors are always
located on or near the bottom of the door track.
STOP
Garage Door Opener
Brand
Type/Color of
Program/Learn button Year
Linear
®
Mega-Code '97-Current
Chamberlain
®
* Orange/Red '97-'03
Chamberlain
®
* Purple '05-Current
Chamberlain
®
* Green '93-'96
Genie
®
Overhead Door
®
Intellicode '95-Current
Genie
®
** Overhead Door
®
Intellicode '93-Current
Stanley
®
Secure Code '98
Chamberlain
®
* Yellow '11-Current
Wayne Dalton
®
Rolling Code '99
The Universal Garage Door Mini Remote Control is compatible
with the following brands, which use a program/learn button:

Chamberlain MC100 Specifications

General

Brand	Chamberlain
Model	MC100
Category	Universal Remote
Language	English