Chamberlain ML510 - Specifications

en
9
Specifications
Input voltage 230 V 50 Hz
Max. pulling force 500 N
Power 80 Watt
Nominal torque 3.0 Nm
Standby consumption 4 Watt
Max. door weight 60 kg
Motor
Type worm gear type
Voltage 24 V
Noise level 55 dB
Drive mechanism
Length of travel 2.305 m
Speed 10 cm/sec
Lighting LED 1W
Safety
Electronically automatic force adjustment
Electrically thermal fuse in transformer
Limit switch adjustment manually
Dimensions
Length (overall) 2.95 m
Required clearance height min. 35 mm
Suspended weight 10 kg
Radio receiver
Memory 8 remote controls
Operating frequency 433,92 MHz
Battery 12 V, type 27 A (10A12-WH)
Spare parts
1. Drive unit
2. Hardware bag
3. Header bracket
4. Door bracket
5. Door-side rail complete
6. Drive-side rail complete
7. Rail, intermediate section (piece)
8. Rail connector (piece)
9. Trolley
10. Chain with actuator complete
11. Mounting bracket (per unit)
12. Pushbutton with cable
13. External release set
14. LED module
15. Control board
16. Referenceswitch (Microswitch)
17. Transformer
18. Remote control
19. Remote control battery (10A12-WH)
Accessory (optional)
1. 54332EML Remote control (2-channel)
2. 5002EX External 2-channel radio receiver to operate
different drives with the 2-channel remote control
(remotes not included)
3. 760EML Keyswitch with cable
4. 770EML Photocells
(Door reverses automatically without touching an
obstacle)
5. EQL03/1702EML External emergency release mechanism
15 16
17