WAXERIPOLISHER INSTRUCTIONS
Before you begin, make
sure
your
car
is clean and dry. Use A
the
car
wash liquid provided. Thework areashould be dry also.
1. Place clean bonnet
on
pad
as
shown (A). Make
sure
the
elastic is tucked down securely and evenly around under-
side of pad.
2. Spread about
a
heaping teaspoonful of
wax
evenly
over
B
the entire surface of the bonnet (B).
3
Apply aboutthree swirls of professional polishing solution overthe
wax
on
bonnet (C). DO NOTAPPLY DIRECTLY TO CAR.This
first application should do 1/3 of the car. For the second and third applications of
wax
and professional polishing solution,
use
half the quantity of each stated above. Bonnet will not absorb
as
much when reloading.
C
4. ALWAYS STARTANDSTOPTHEPOUSHER ON OR AGAINST
THE CAR SURFACE (D).
D
Place extension cord
over
shoulder and do flat surfaces first-
hood. trunk and roof. Cover
areas
quicklywith broad, sweeping
strokes in
a
criss-cross pattern. DO NOT PRESS DOWN ON
POLISHER. THE MACHINE’S ACTION, NOT PRESSURE,
DOES THE BEST JOB.
To Next Page
Loading...