Need help?Do you have a question about the Chambers C series and is the answer not in the manual?
Detailed steps for installing the gas range, including uncrating, legs, back panel, and gas connections.
Instructions for leveling the range using adjustable leg bolts and checking grate levelness.
Adjusting oven burner flame, safety pilot, and by-pass.
Detailed guide on calibrating the oven thermostat and models.
Adjusting broiler, thermowell, and top burner flames and pilots.
Step-by-step guide to lighting and adjusting the automatic oven pilot.
Guides for common thermostat issues like dirt, pilot problems, and bulb damage.
Guides for replacing the thermostat, gas valve, and timer.
Using adjusting screws to achieve a proper oven door fit.
Steps for changing the oven door and front assembly.
Details on thermostat bulb, capillary tube, and gas valve operation.
Instructions for converting to different gas types using solid mixer pin points.
Guide for converting using universal mixer pin points.
Table of orifice sizes for universal mixer pin points by gas type and component.
Table of orifice sizes for solid mixer pin points by gas type and component.
Describes the correct flame height for the oven burner and by-pass.
BTU input and flame adjustment for top, thermowell, broiler, and oven burners.
A comprehensive list of recommended tools for installation and service.
To Next Page
General