4
Safety
• Do not stand in front of the trap when it is in the cocked position. Accidental release of the target
and/or throwing arm can cause serious injury or death!
• Before installing the Wireless Receiver on the trap, make sure that the throwing arm is in the
uncocked position, the trap is in the o position and the trap is disconnected from the battery.
WARNING: DO NOT MANUALLY FORCE THE THROWING ARM THROUGH THE
UNCOCKED POSITION AS THE MAIN SPRING WILL TAKE OVER AND FIRE THE TRAP,
POTENTIALLY CAUSING SERIOUS INJURY OR DEATH.
• All personnel operating the trap should be thoroughly familiar with the operating instructions
and the safety issues relating to the trap.
• Do not leave trap in the cocked position. Accidental release of the throwing arm can occur.
• Keep hands and body away from the trap and throwing arm path while the trap is operating.
• Always turn trap o and disconnect power when unattended, not in use or performing
maintenance.
• Always check that others are safe before releasing the trap.
• Stay outside of safety ring zone at all times.
• Never store the remote in pockets with the battery installed. Unintentional pressing of the button
will cause the trap to release.
• Before working on the trap, ensure the battery is removed from the remote.
WARNING: THOROUGHLY READ
INSTRUCTIONS BEFORE INSTALLING
OR OPERATING THE WIRELESS
REMOTE! FAILURE TO FOLLOW
SAFETY RULES CAN RESULT IN
SERIOUS INJURY OR DEATH !
Contents
• Wireless Receiver (attach included antenna to top
of Receiver)
• Wireless Remote Transmitter
• Adhesive “Hook & Loop” Mounting Pad
(included, not shown)
• 12 Volt Type A23 Battery for Transmitter
(included, not shown)
Wireless
Receiver
Wireless
Remote
Transmitter
To Next Page
Loading...
