Champion SVPRO Series

Need help?

Do you have a question about the Champion SVPRO Series and is the answer not in the manual?

Summary

Before You Begin

Tools Required

Lists the tools necessary for the installation process, including hammer, socket wrench, and wirecutters.

Installation Site Prep

Single Locker Pad Requirements

Specifies the recommended concrete pad dimensions and anchor layout for a single locker unit.

Double Locker Pad Requirements

Specifies the recommended concrete pad dimensions and anchor layout for a double locker unit.

Triple Locker Pad Requirements

Specifies the recommended concrete pad dimensions and anchor layout for a triple locker unit.

Installation

Moving and Positioning Units

Instructions for moving cabinets using a forklift or pallet jack and placing them on the prepared pad.

Securing Units to Pad

Guides the process of anchoring the cabinets to the concrete pad using provided hardware.

Installing Slope Top

Details how to install the slope top onto the top of the cabinets for proper fit and securing.

Ganging Multiple Units

Provides instructions on how to connect or gang multiple cabinets together using the required hardware kit.

SVP3 Unit Installation

Specific steps for installing the SVP3 model, including lifting with eyelets and securing.

Proper Use

Load Capacity and Usage Warnings

Highlights the maximum load per bay and warns against dropping items or using shelves as steps.

Noke Lock Set Up and Use

Noke Lock Instructions

Details on locating, setting up, and using Noke Locks, referring to a separate guide.

Proper Care

Cleaning and Maintenance

Recommendations for periodically cleaning surfaces with mild detergent and applying auto wax for protection.

Safety Information

General Safety Precautions

Lists critical safety warnings, including not towing, altering, or improperly closing doors.

Summary

Before You Begin

Tools Required

Lists the tools necessary for the installation process, including hammer, socket wrench, and wirecutters.

Installation Site Prep

Single Locker Pad Requirements

Specifies the recommended concrete pad dimensions and anchor layout for a single locker unit.

Double Locker Pad Requirements

Specifies the recommended concrete pad dimensions and anchor layout for a double locker unit.

Triple Locker Pad Requirements

Specifies the recommended concrete pad dimensions and anchor layout for a triple locker unit.

Installation

Moving and Positioning Units

Instructions for moving cabinets using a forklift or pallet jack and placing them on the prepared pad.

Securing Units to Pad

Guides the process of anchoring the cabinets to the concrete pad using provided hardware.

Installing Slope Top

Details how to install the slope top onto the top of the cabinets for proper fit and securing.

Ganging Multiple Units

Provides instructions on how to connect or gang multiple cabinets together using the required hardware kit.

SVP3 Unit Installation

Specific steps for installing the SVP3 model, including lifting with eyelets and securing.

Proper Use

Load Capacity and Usage Warnings

Highlights the maximum load per bay and warns against dropping items or using shelves as steps.

Noke Lock Set Up and Use

Noke Lock Instructions

Details on locating, setting up, and using Noke Locks, referring to a separate guide.

Proper Care

Cleaning and Maintenance

Recommendations for periodically cleaning surfaces with mild detergent and applying auto wax for protection.

Safety Information

General Safety Precautions

Lists critical safety warnings, including not towing, altering, or improperly closing doors.

This document outlines the proper use and installation procedures for the Champion SVPRO Series cabinets, providing a comprehensive guide for users. The SVPRO Series is designed for robust tool storage, emphasizing durability and secure operation.

Function Description

The Champion SVPRO Series cabinets are heavy-duty storage units designed to organize and secure tools and equipment. They are suitable for various environments, including workshops, garages, and industrial settings. The cabinets are built to be installed on a level concrete pad, either as single units or ganged together to form larger storage systems. Key features include multiple locker bays, a robust locking system, and options for a slope top. The design prioritizes stability and security, ensuring that stored items are protected and accessible. The installation process involves anchoring the units to a concrete pad, which enhances their stability and prevents tipping. The modular nature of the SVPRO Series allows for flexible configurations, adapting to different space requirements and storage needs.

Important Technical Specifications

Load Capacity: Each locker bay has a maximum load capacity of 750 lbs. This specification highlights the robust construction and ability to store heavy tools and equipment.
Anchoring: The units require installation with (4) 3/8" X 3-3/4" Concrete Wedge Anchors (not included) per unit. This anchoring system is crucial for securing the cabinets to the concrete pad, preventing movement and enhancing safety.
Pad Dimensions:
- Single Locker Pad: Recommended to be 6" larger in width and 6" larger in depth than the unit. The diagram shows a pad with dimensions of 36" (depth) and 42" (width), with a 3" depth. Anchor points are precisely located at 4-21/32" from each corner along the width and length, and at the center of the width.
- Double Locker Pad: Recommended to be 6" larger in width and 6" larger in depth than the combined units. The diagram shows a pad with dimensions of 36" (depth) and 78" (width), with a 3" depth. Anchor points are similarly located, accommodating two ganged units.
- Triple Locker Pad: Recommended to be 6" larger in width and 6" larger in depth than the combined units. The diagram shows a pad with dimensions of 36" (depth) and 114" (width), with a 3" depth. Anchor points are arranged to support three ganged units.
Ganging Hardware: For ganging multiple units, a specific Ganging Hardware Kit (Part #7001228) is required, with one kit needed per pair of ganged units. This ensures a secure and stable connection between cabinets.
Locking System: The cabinets are equipped with a locking system, and Noke Locks are provided, typically found in the bottom right of the locker. These locks are designed for secure access control.
Models: The installation instructions refer to models SVP2, SVP5, and SVP8, indicating a range of cabinet sizes or configurations within the SVPRO Series. The SVP3 model has specific installation instructions detailed in Step 5.
Part Number: The document's part number is 1000629.

Usage Features

Modular Design: The SVPRO Series cabinets can be installed as standalone units or ganged together to create custom storage solutions. This modularity allows users to expand their storage as needed.
Secure Storage: The robust construction and integrated locking system ensure that tools and equipment are securely stored, protecting them from theft or unauthorized access.
Accessibility: The design allows for easy access to stored items, with doors that open to reveal the contents of each locker bay.
Slope Top Option: The installation guide mentions the option to install a "Slope Top," which can be beneficial in certain environments to prevent items from being placed on top of the cabinets or to facilitate drainage.
Noke Lock Integration: The inclusion of Noke Locks provides a modern and potentially keyless access solution, enhancing convenience and security. Users are directed to a separate "Noke Quick Start Guide" for detailed setup instructions.
Safety Guidelines: The manual emphasizes several safety precautions:
- Do not drop items into drawers, as this may cause damage.
- Do not use shelves as a step or seat to prevent injury or damage.
- Ensure the product is on a level surface at all times to prevent personal injury or product damage.
- Lock all drawers before moving the product.
- Do not attach or mount the product to a vehicle, as this voids the warranty and may cause injury or damage.
- Do not tow the product with power equipment.
- Do not alter the product in any manner, as this voids the warranty.
- Ensure all doors are fully closed for the locking system to work properly.

Maintenance Features

Easy Cleaning: The surfaces of the cabinets can be periodically cleaned with a mild detergent and water. This simple maintenance routine helps keep the units looking good and free from grime.
Finish Protection: Applying auto wax to the storage unit's finish is recommended to preserve its appearance and protect against scratches. This suggests a durable finish that can be maintained with standard automotive care products.
Warranty: Champion Tool Storage offers a warranty to the original purchaser, covering defects in materials and workmanship for as long as the original purchaser retains ownership. Hardware components, including drawer slides, hinges, and locks, are warranted for one year from the delivery date. The warranty excludes damage from misuse, abuse, modifications, or non-conformance to recommended capacities. This provides assurance regarding the product's quality and longevity, provided proper care and use are followed.