CHANCE C403-3374 User Manual

©
Copyright 2005 Hubbell Power Systems
P403-3408
rev A
Operating Instructions
for
Auto-Ranging Voltage Indicator
The equipment covered in this manual must be used and serviced only by competent,
trained personnel familiar with and following approved work and safety practices.
This equipment is for use by such personnel and this manual is not intended as a
substitute for adequate training and experience in safe procedures for this type of
equipment.
These instructions neither cover all details or situations in equipment use, nor do
they provide for every possible contingency to be encountered in relation to
installation, operation or maintenance. Should additional information and details be
desired or if situations arise which are not covered adequately for the user’s purpose,
the specifics should be referred to Hubbell Power Systems, Chance
®
.
Before operating a CHANCE
®
Auto-Ranging Voltage Indicator, thoroughly read,
understand, and follow these instructions. Keep these instructions in the device
case for future reference.
NOTICE
Catalog No.
C403-3374
Voltage
600V - 69kV
®
Do not allow universal fitting to touch any part of URD cabinet, to become grounded
in any other way, or to contact another phase as this will cause erroneous voltage
indication and could cause severe personal injury or damage to equipment.
Catalog No.
C403-3375
Voltage
69kV - 500kV
! CAUTION
! WARNING
Sold by:
http://www.TWAcomm.com
Toll Free: (877)
389-0000

CHANCE C403-3374 Specifications

General

Brand	CHANCE
Model	C403-3374
Category	Touch Panel
Language	English

Summary

Operating Instructions

Basic Function and Design

Explains the ARVI's purpose, construction, and how it indicates voltage.

Voltage Ranges

Lists the voltage ranges for each class indicated by the ARVI models.

Auto-Hold Feature

Details the automatic hold function, its activation, and reset procedure.

Operation Procedures

Overhead Operation

Instructions for using the ARVI on overhead power lines, including safety precautions.

Underground (URD) Operation

Specific instructions and warnings for using the ARVI on underground systems.

Readings and Maintenance

Interpreting Overhead Readings

Guidance on understanding ARVI indications on overhead conductors.

Interpreting Underground (URD) Readings

Guidance on understanding ARVI indications on underground equipment.

Battery Replacement

Step-by-step guide for replacing the unit's batteries.

Specifications and Support

Product Care

Recommendations for cleaning, storing, and maintaining the ARVI.

Technical Specifications

Lists operating temperature, power requirements, and other technical details.

Repair and Contact Information

Details on how to obtain repair services and contact support.