Need help?Do you have a question about the Chandler 10 PTT-FT and is the answer not in the manual?
General| Brand | Chandler |
|---|---|
| Model | 10 PTT-FT |
| Category | Farm Equipment |
| Language | English |
Details on warranty coverage for different spreader types and duration.
Requirement for written approval for all warranty claims.
Information on obtaining and submitting warranty claim forms.
Details on labor approval and rates for dealers.
Responsibilities of the dealer in warranty issues.
Warranty is void if non-genuine parts are used.
Procedures for shipping Chandler Genuine Parts for replacement.
Guidelines for returning parts for warranty evaluation.
Damage from misuse or improper installation is not covered.
Warranty does not cover incomplete equipment or unapproved add-ons.
Lists items and situations not covered by the warranty.
Covers defects in workmanship/materials for Raven applied products.
How to submit warranty claims for Raven components.
Process for warranty reimbursement of Raven parts.
Explains the purpose and meaning of safety labels.
Lists essential safety precautions for operating the spreader.
Shows specific warning decals and their meanings.
Illustrates and explains a PTO safety decal.
Decals for lug nut checks and speed limits.
Shows a decal for hydraulic system connection warnings.
Warnings about rotating chains and spinners.
Step-by-step guide for shortening the PTO drive shaft.
Detailed instructions for lubricating PTO components.
Illustration of the 10 PTT-FT model.
Illustration of the 20 PTT-FT model.
Details on hopper capacity and payload for both models.
Exploded view illustration of PTO driven spinners.
List of parts for PTO drive spinners.
Illustration of press wheel drive for PTO spinners.
Parts list for press wheel drive PTO spinners.
Top view illustration of press wheel drive PTO spinners.
Illustration and parts list for hydraulic cylinder engagement.
Hydraulic diagram for plug-to-tractor systems.
Parts list for hydraulic spinners (plug to tractor).
Illustration of press wheel drive for hydraulic spinners.
Parts list for press wheel drive hydraulic spinners.
Exploded view of hydraulic spinners.
Parts list for hydraulic spinners.
Illustration and parts list for the spinner motor.
Illustration of the flow control valve.
Procedure for checking and adjusting spinner pressure settings.
Step-by-step guide for connecting hydraulic spinners to tractor remotes.
Procedure to verify the correct rotation of spinners.
Procedure for setting the correct spinner speed.
Hydraulic system diagram for self-contained units.
List of parts for the self-contained hydraulic system.
Illustration of the hydraulic filter assembly.
Procedure for checking and adjusting spinner pressure settings.
Illustration and parts list for the 7,000 lb torsion axle.
Illustration and parts list for the 10,000 lb torsion axle.
Table detailing tire and wheel specifications.
Torque specifications for lug nuts.
General steps for operating the pull type spreader.
Procedure for setting spinner speed for hydraulic spinners.
Guidelines for adjusting the material divider for optimal spread.
Overhead view illustration of the flow divider assembly.
Hydraulic system diagram for plug-to-tractor setup.
List of parts for plug to tractor hydraulics.
Hydraulic system diagram for self-contained units.
List of parts for the self-contained hydraulic system.
Parts list for the P2500 pump type I shaft.
Illustration of the conveyor assembly.
Parts list for the hydraulic conveyor drive.
Illustration of the Rawson single gear case.
Parts list for the Rawson single gear case.
Illustration of the Rawson single gear case with sensor port.
Parts list for the Rawson single gear case with sensor port.
Illustration of the Rawson twin gear case.
Parts list for the Rawson twin gear case.
Illustration of the Rawson twin gear case with sensor port.
Parts list for the Rawson twin gear case with sensor port.
Illustration and parts list for the conveyor motor.
General steps for operating the spreader with a control system.
Procedure for setting spinner speed with a control system.
Guidelines for adjusting the material divider.
Exploded view illustration of the flow divider assembly.
Parts list for the flow divider assembly.
Guidelines for maintaining the spreader to extend its life.
Recommendations for troubleshooting common issues.
Procedure for adjusting the spreader for optimal spread pattern.
Details on adjusting spinner speed and its impact.
Guidelines for adjusting the material divider.
Steps to prepare the spreader for a spread pattern test.
Steps for conducting a spread pattern pan test.
Form for recording spread pattern test data.
Examples of acceptable and unacceptable spread patterns.
Guidance on documenting adjustments and analyzing test results.
Recommended driving methods for spread pattern testing.
Example of an acceptable pattern using a specific driving method.
Troubleshooting guide for spread pattern issues.
Spreader constants for different control systems and 16" chain.
Spreader constants for different control systems and 20" chain.
Spreader constants for different control systems and 24" chain.
To Next Page