To Next PageTo Next PageWhy Changzhou Gardensun Furnace NCZH-G-SS burner won’t light?
Your Changzhou Gardensun Furnace Patio Heater burner may not light due to several reasons: * The propane cylinder may be frosted over. If this is the case, wait until the propane cylinder warms up and is defrosted. * There may be a blockage in the orifice. If so, clear the blockage. * The control knob may not be in the ON position. Turn the control knob to ON.
What to do if Changzhou Gardensun Furnace NCZH-G-SS Patio Heater burner flame is low?
If the burner flame on your Changzhou Gardensun Furnace Patio Heater is low, here are a few things to check: 1. Gas pressure might be low. Turn the cylinder valve OFF and replace the cylinder. 2. If the outdoor temperature is less than 40ºF and the tank is less than 1/4 full, use a full cylinder. 3. Check the burner and orifices for any blockage.
General| Model | NCZH-G-SS |
|---|---|
| Category | Patio Heater |
| Brand | Changzhou Gardensun |
| Type | Gas Patio Heater |
| Heat output | 46000 BTU |
| Material | Stainless Steel |
Instructions for immediate actions if a gas leak is detected.
Specifies the appliance is for outdoor use only.
Warns about carbon monoxide poisoning in enclosed spaces.
Critical steps to follow if a gas leak is detected.
Covers risks of explosion and fire due to combustibles and vapors.
Explains CO poisoning symptoms and prevention.
Alerts users to hot surfaces and handling precautions.
Connecting the hose and regulator to the propane cylinder.
Details on cylinder type, condition, and proper connection.
Step-by-step guide to check for gas leaks using a soap solution.
Ensuring safe conditions and connections before turning on gas.
Detailed steps for igniting the patio heater's burner.
